Aluminium

Description

Silver Anodised & Black Anodised

• Available on aluminium products only (typically downlights, linear and surface mounted products), refer to product datasheets.
• Bezels and surface mounted products are anodised to 25 microns
• Exterior aluminium bodies are anodised to a thickness of 50 microns
• Depending on the application, aluminium bezel, linear and surface mounted products can be painted (please see paint finishes section for guidance)
• Particularly robust material for marine environments

Note on dissimilar metals: - When aluminium is in contact with both an electrolyte (like seawater) and dissimilar metals like stainless steel, galvanic corrosion can occur. The effect is worse with copper, brass and bronze. As most of our bodies are manufactured from aluminium, care needs to be taken when installing our products in wet environments. Always specify a fixing sleeve if being used externally as this adds protection. A fitting with brass or bronze screws threaded into aluminium should not be used outdoors.

Downloads

Finishes Datasheet

Similar Products

Brass